LED Solar Floodlight VIDEX-FLOOD-LED-SOLAR-GELIO-SENSOR-20W-NW
LED Solar Floodlight VIDEX-FLOOD-LED-SOLAR-GELIO-SENSOR-20W-NW
-
EAN:5904405542354
-
Battery power:16 Wh
-
Luminous flux:600 Lm
-
Correlated color temperature:5000K (neutral white)
-
Beam angle:90°
-
Place of installation :Flat surface, Wall
-
-
Vertical adjustment range:180°
-
Place of application:outdoor
-
Cable length:1 m
-
Displacement factor (cos φ1):-
-
Color rendering index (CRI):Ra > 80
-
Lifetime (L70B50):30000 h
-
On/Off cycles:20000
-
Housing colour:Gray
-
Impact protection:IK07
-
Electric shock protection class:III
-
Minimum distance from the illuminated object:0.5 m
-
Diffuser material:Polycarbonate (PC)
-
Diffuser type:symmetric
-
Motion sensor:yes
-
Sensor type:Microwave
-
Sensor vertical adjustment range:180°
-
Sensor detection distance:2 - 8 m
-
Operating temperature range:-20° +50°C
-
Dimmable:remote controller
-
Solar panel voltage:6 V
-
Solar panel power:10 W
-
Light source replaceable:no
-
Battery type:LiFePO4
-
Battery voltage:3.2 V
-
Battery capacity:5000 mAh
-
Battery replaceable:no
-
Full charge time:5-8 h
-
Full discharge time:≤ 12 h
-
Mercury content:Does not contain
-
Ingress protection:IP65
-
Housing material:Aluminum alloy
-
Height:145 mm
-
Width:128 mm
-
Depth:42 mm
-
In the package:1 pc.
-
Outer box:5 pcs.
-
Unit nett weight:1780g
-
Warranty:2 years
-
LED Solar Floodlight VIDEX-FLOOD-LED-SOLAR-GELIO-SENSOR-20W-NW operates completely independently and is charged by a solar panel. By using this floodlight, you will be fully protected from possible power outages at your home or cottage, as the rechargeable battery (built into the floodlight) charges throughout the day from sunlight, allowing it to operate autonomously for up to 12 hours. This LED floodlight is ideal for use in locations where connecting to the power grid is not possible or where the electrical load is very limited.
The main advantage of using a solar-powered floodlight is the complete absence of electricity costs, as well as:
• The light source consists of LEDs that provide high-quality, uniform, and directional illumination;
• A long service life without the need for maintenance;
• IP65 ingress protection allows the floodlight to be used in any weather conditions;
• Quick and convenient installation.
Before first use, it is recommended to fully charge the floodlight. To switch on the LED floodlight, press the «ON» button on the remote control. Switching the floodlight on and off is done manually, regardless of the time of day. Using the remote control, you can select the desired operating mode and adjust the brightness.
AUTO Mode: Press the «AUTO» button — the floodlight will flash once. The «AUTO» button activates the automatic operation mode: 1st hour — 100% brightness; 2nd hour — 80% brightness; 3rd to 6th hour — 60% brightness; 7th hour — 50% brightness; from the 8th hour until shutdown — 30% brightness.
The «M» button allows you to select the motion sensor modes:
• Mode A: Press «M», the floodlight will flash TWICE. In this mode, the floodlight switches to 100% brightness when motion is detected and operates at 20% brightness when no motion is detected.
• Mode B: Press «M», the floodlight will flash THREE TIMES. The light turns on at 100% brightness when motion is detected and turns off one minute after motion stops. To deactivate the modes, press the «M» button again after Mode B. When ambient light is below 50Lx, the floodlight turns on and switches to automatic operation.
Motion sensor: Motion detection distance is up to 8 m. Light sensitivity threshold is 50 Lx.
• «3H» turns the floodlight on for 3 hours at night.
• «5H» turns the floodlight on for 5 hours at night.
• «8H» turns the floodlight on for 8 hours at night.
The floodlight saves the previous settings and applies them the next time it is switched on.
