Videx
Solar
Solar Flood Light
LED Solar Floodlight VIDEX VL-FSO2-505

LED Solar Floodlight VIDEX VL-FSO2-505

Index: VL-FSO2-505

Add to favorites Add to compare

Parameters

EAN:

4820246482493
Battery power:

32 Wh
Luminous flux:

1000 Lm
Correlated color temperature:

5000K (neutral white)
Beam angle:

90°
Place of installation :

Flat surface, Wall
- Vertical adjustment range:
  
  180°
- Place of application:
  
  outdoor
- Cable length:
  
  1 m
- Displacement factor (cos φ1):
  
  -
- Color rendering index (CRI):
  
  Ra > 80
- Lifetime (L70B50):
  
  30000 h
- On/Off cycles:
  
  20000
- Housing colour:
  
  Gray
- Impact protection:
  
  IK07
- Electric shock protection class:
  
  III
- Minimum distance from the illuminated object:
  
  0.5 m
- Diffuser material:
  
  Polycarbonate (PC)
- Diffuser type:
  
  symmetric
- Motion sensor:
  
  no
- Operating temperature range:
  
  -20° +50°C
- Dimmable:
  
  yes
- Solar panel voltage:
  
  6 V
- Solar panel power:
  
  10 W
- Light source replaceable:
  
  no
- Battery type:
  
  LiFePO4
- Battery voltage:
  
  3.2 V
- Battery capacity:
  
  10000 mAh
- Battery replaceable:
  
  no
- Full charge time:
  
  5-8 h
- Full discharge time:
  
  ≤ 12 h
- Mercury content:
  
  Does not contain
- Ingress protection:
  
  IP65
- Housing material:
  
  Aluminum alloy
- Height:
  
  207 mm
- Width:
  
  160 mm
- Depth:
  
  22.5 mm
- Outer box:
  
  10 pcs.
- Warranty:
  
  2 years

See all specifications

Description

Autonomous VIDEX floodlight that operates completely independently and is charged by a solar panel. By using this floodlight, you will be fully independent of possible power outages at your home or country house, as the rechargeable battery (built into the floodlight) is charged throughout the day by sunlight, allowing it to operate autonomously for up to 12 hours. This LED floodlight is advisable for use in any location where there is no possibility to connect to the power grid or where the electrical load capacity is very limited.

It is necessary to choose the optimal location for installing the floodlight. When installing the LED floodlight, it is recommended to orient the solar panel toward the south to achieve maximum energy generation (position the panel so that sunlight falls perpendicular to its surface) and to prevent shading of the solar panel by trees, building structures, or other objects.

The main advantage of using a solar-powered floodlight is the absence of any electricity costs, as well as:
• LEDs are used as the light source, providing high-quality, uniform, and directional illumination;
• Long service life without the need for maintenance;
• IP65 ingress protection allows the floodlight to be used in all weather conditions;
• Quick and convenient installation.

Before first use, it is recommended to fully charge the floodlight. To turn on the LED floodlight, press the «ON» («Turn on») button on the remote control. The LED floodlight can be turned on and off manually, regardless of the time of day. Using the remote control, you can select the required operating mode and adjust the brightness of the floodlight.

AUTO mode: Press the «AUTO» button; the floodlight will emit a short light signal once. The «AUTO» button activates the automatic operating mode of the floodlight: first hour – 100% brightness; second hour – 80% brightness; from the third to the sixth hour inclusive – 60% brightness; seventh hour – 50% brightness; from the eighth hour until shutdown – 30% brightness.

• «3H» turns on the floodlight at night for 3 hours.
• «5H» turns on the floodlight at night for 5 hours.
• «8H» turns on the floodlight at night for 8 hours.

When the ambient illumination level falls below 50 Lx, the floodlight turns on and operates in automatic mode.

The floodlight memorizes the previous settings and applies them at the next power-on.