LED RECHARGEABLE LIGHT with MOTION SENSOR VIDEX VL-NL013W-SR
LED RECHARGEABLE LIGHT with MOTION SENSOR VIDEX VL-NL013W-SR
-
EAN:4820246486453
-
On-mode power (Pon):1.5 W
-
Luminous flux:150 Lm
-
Correlated color temperature:6500K (cold white), 4000K (neutral white), 3000K (warm white)
-
Beam angle:120°
-
Place of application:indoor
-
-
Color rendering index (CRI):Ra > 80
-
Housing colour:White
-
Input interface:USB-C
-
Charging current:DC 5V, 1A
-
Electric shock protection class:III
-
Ultraviolet radiation:no
-
Motion sensor:yes
-
Sensor type:PIR
-
Sensor detection angle:120°
-
Sensor time delay:20 s
-
Sensor detection distance:≤6 m
-
Operating temperature range:-20° +40°C
-
Dimmable:yes
-
Magnetic base:Yes
-
Lens material:Polycarbonate (PC)
-
Light source replaceable:no
-
Battery type:Li-pol
-
Battery voltage:3.7 V
-
Battery capacity:2200 mAh
-
Battery replaceable:no
-
Full charge time:2 h
-
Full discharge time:≤ 10 h
-
Mercury content:Does not contain
-
Ingress protection:IP20
-
Housing material:ABS
-
Height:300 mm
-
Width:40 mm
-
Depth:29 mm
-
In the package:1 pc.
-
Outer box:24 pcs.
-
Unit nett weight:155g
-
Warranty:2 years
-
LED Rechargeable Light with motion sensor VIDEX VL-NL013W-SR is designed for localized lighting of residential spaces, closets, bookshelves, and more. It can automatically illuminate a specific area by detecting motion using the built-in sensor.
ADVANTAGES AND FEATURES OF THE SET:
- flexible lighting mode settings
- built-in Li-pol 3.7V, 2200mAh battery
- USB-C charging
- charging time – 3 hours
- built-in infrared motion sensor (PIR sensor)
- sensor detection angle – 120°
- remote control included with an operating distance of <6m
- luminous flux – 150Lm
- light color temperature – 3000K / 4500K / 6500K
- beam angle – 120°
- LED lifespan – 20 000 hours
- operating time – up to 10 hours
PACKAGE CONTENT:
1. Lamp
2. Charging cable
3. Metal mounting plate
4. Double-sided adhesive tape
5. Remote control with CR2025 battery
6. User manual
7. Individual packaging
LAMP MOUNTING OPTIONS:
a) Permanent mounting using double-sided adhesive tape. Please note that once attached, the product cannot be removed.
b) Mounting on metal surfaces using built-in magnets.
c) Mounting on non-metal surfaces using double-sided adhesive tape with the metal plate.
REMOTE CONTROL:
Remove the transparent protective strip from the remote control.
1) Turn on the device
2) Turn off the device
3) Constant light mode
4) Day sensor mode. The light turns on automatically when motion is detected at night/in darkness, then turns off after 20 seconds if no motion is detected.
5) Night sensor mode. The light turns on automatically when motion is detected during the day/in light, and then turns off after 20 seconds if no motion is detected.
6) Switch color temperature between warm white, neutral white, and cool white.
7) Increase/decrease brightness by one step.
8) Set brightness to 10/50/100%
9) Auto-off timers. Press to set automatic light turn-off after 15 / 30 / 45 / 60 / 120 minutes.
CHARGING:
Connect the USB-A plug of the charging cable to a corresponding output and connect the charging cable to the lamp’s USB-C input port. During charging, the indicator lights red. After full charge, the indicator lights green. It is recommended to fully charge the battery before first use.
For long-term storage, it is recommended to keep the battery partially charged to extend its lifespan. Do not store the product with a fully discharged battery. Store the set in a dry place away from direct sunlight.
The warranty period is 2 years.
