LED Headlamp VIDEX VLF-A056H 200Lm 5000K is designed for personal use in the dark or in areas without lighting. It can be used both as a handheld and a headlamp thanks to the included head strap and headlamp holder.

The flashlight features white and red light. Thanks to its magnetic base, head strap, removable clip included, dust and water protection class (IP68), and drop resistance up to 2 meters, it can be used in a wide variety of scenarios.

Maximum brightness – 200 Lm. Uses a Luminus SST20 LED. An additional feature of the flashlight is its ultra-lightweight design – 75g.

FLASHLIGHT OPERATION
The flashlight modes are controlled using the power button located on its body. With it, you can turn the flashlight on and off, lock it, switch between brightness levels and colors, and activate the battery indicator. 
1. To turn on the flashlight, press and hold the power button for about 0.5 seconds.
2. To switch between red and white light, double-press the power button while the flashlight is on. When switching colors, the flashlight always defaults to low power mode.
3. Switch between brightness modes by pressing the power button while the flashlight is on.
4. To lock the flashlight, press and hold the power button for 3 seconds. The flashlight will blink three times in dim red light to indicate it is locked.
5. To unlock the flashlight, press and hold the power button for 3 seconds. The flashlight will blink three times in dim red light to indicate it is unlocked, then it will turn on in low red light mode.
6. To turn off the flashlight, press and hold the power button for about 0.5 seconds.

FLASHLIGHT MODES
HIGH (Maximum white light brightness) – 200Lm. Beam distance: 70m. Runtime: 10h. Luminous intensity: 1100cd.
MIDDLE (Medium white light brightness) – 50Lm. Beam distance: 34m. Runtime: 14h. Luminous intensity: 293cd.
LOW (Minimum white light brightness) – 3Lm. Beam distance: 10m. Runtime: 100h. Luminous intensity: 26cd.
RED HIGH (Maximum red light brightness) – 15Lm. Beam distance: 10m. Runtime: 10h. Luminous intensity: 20cd.
RED LOW (Minimum red light brightness) – 5Lm. Beam distance: 8m. Runtime: 18h. Luminous intensity: 15cd.
RED FLASH (Red flashing light mode) – 5Lm. Beam distance: 8m. Runtime: 36h. Luminous intensity: 15cd.

Runtime tests were conducted using the standard VIDEX LIR6C/AA/1.5V/2200 battery at 21±3°C and 50–80% humidity. Actual performance may vary depending on the environment and type of battery used. The flashlight automatically memorizes the last selected mode.

CHARGING
The flashlight itself does not have a built-in charging port. Charging is done via the USB-C port on the Li-ion AA 1.5V 2200mAh battery included. To charge the battery, turn off the flashlight, unscrew the back cover counterclockwise, and remove the battery. Connect one end of the USB-A charging cable to a charger and the other end (USB-C) to the battery charging port. During charging, the green indicator on the battery will blink, showing that charging is in progress. When fully charged, the indicator will stay solid. After charging, disconnect the cable, insert the battery with the anode (+) toward the power button, and tightly screw the cover back on.

If the flashlight is off, a single press of the power button activates the LED battery indicator, showing the remaining charge. The indicator stays visible for 3 seconds unless turned off earlier by another single press of the power button. Indicator levels:
- Green solid: 100–75% charge.
- Green blinking: 74–50% charge.
- Red solid: 49–25% charge. 
- Red blinking: 24–1% charge.

WARNING! Never use the flashlight while charging. Do not use lithium-ion batteries with a nominal voltage of 3.6V! Using a battery with voltage above 2V may damage the headlamp. Such damage is not covered under the limited warranty. See the flashlight manual for a list of compatible battery types. Warranty period: 3 years for the flashlight, 1 year for the battery.