Multipurpose Rechargeable LED Flashlight VIDEX VLF-M044UV is designed for versatile use thanks to its wide range of functions. It is primarily used in the dark or in unlit indoor areas.

Maximum brightness is 400Lm. The flashlight uses a CREE XTE 5W LED (6500K) for the front light and a COB 10W LED (4000K) for the side light. The side light operates in three colors – white, red, and ultraviolet.

FEATURES:
• Vertically adjustable main head within 270°.
• The flashlight has two separate light sources.
• Side light (COB) has three modes: white light with high color rendering index (Ra>95), red steady or signal light, ultraviolet light.
• White light with smooth dimming function.
• Built-in magnet and metal loop allow attaching the flashlight in multiple ways.

OPERATING MODES:
TOP – (front light) white light mode.
COB White – COB lamp white light mode.
COB Red On – COB lamp red light mode.
COB Red Flash – COB lamp red flashing light mode.
COB UV – COB lamp ultraviolet light mode.

FLASHLIGHT OPERATION INSTRUCTIONS:
- Short press of the «ON/OFF» button – turns on the light, switches between «Top» and «COB White» modes, and turns off the light.
- Long press of the «ON/OFF» button while white light is on – adjusts brightness.
- Double press of the «ON/OFF» button – activates the group of modes «COB Red On», «COB Red Flash», and «COB UV». Short presses cycle through these modes. A second double press turns off the flashlight.

BATTERY STATUS INDICATION
When the light is off, press and hold the button for 2 seconds to check the battery level. The indicator will remain on while the button is held.
Battery status is also displayed continuously when the light is on.
• 5 bars – ≤100% charged
• 4 bars – ≤80% charged
• 3 bars – ≤60% charged
• 2 bars – ≤40% charged
• 1 bar – ≤20% charged
• 1 blinking bar – battery is low

BATTERY CHARGING
Turn off the flashlight, open the protective cover, and connect the charging cable to the flashlight port (USB-C). During charging, the indicator bars blink sequentially. When fully charged, all 5 bars remain steadily lit. After full charge, disconnect the cable and close the protective cover to prevent water or dust from entering the flashlight.

Original batteries are supplied pre-charged and can be used immediately after purchase. However, it is recommended to fully charge the battery before first use. Recharge the battery in time before it is completely discharged. For long-term storage, it is recommended to maintain the battery at approximately half charge to prolong its lifespan.

WARNING! Never operate the flashlight while charging.

Warranty is 3 years for the flashlight, 1 year for the battery. Warranty does not cover accessories.